Call Today · Open 7 Days · Storm Line, 7 Days
0113 460 1042
Written Quotes
£5m Insured
Free Surveys
10-Yr Guarantee
Professional chimney repairs, repointing, rebuilds and removal across Leeds. Code-4 lead flashing specialists. Safe scaffolded access. Building regulations compliant. We work on every kind of Leeds chimney — from stone-stack Victorian terraces to modern flue-only chimneys.
How much will it cost? See our guide to chimney repair costs in Leeds for typical prices for repointing, lead flashing, rebuilds and scaffolding.
Chimneys take more weather than any other part of your roof — they sit higher, catch more wind, and sustain freeze-thaw damage from every direction. On Leeds's older housing stock especially, chimney work is one of the most common roofing jobs we carry out. From repointing tired mortar joints on a Victorian stack in Headingley to a full rebuild of a structurally unsafe chimney in Kirkstall, we handle every kind of chimney work to current building regulations.
We work with safe scaffolded access on every chimney job — never just from a ladder. That's both safer for our team and gives better-quality results for you. Chimney problems often show up alongside wider roof wear, so if you've also got slipped tiles or a leak, our roof repairs team can sort both in one visit — and for a stack shedding bricks in a storm, our emergency response can make it safe quickly.
Replacing tired mortar joints with proper lime or NHL mortar — restores weather resistance.
Full or partial rebuild where the structure has failed. Original brick or stone matched.
New code-4 lead flashing around chimney base. Stops the most common chimney leak.
Safe removal of redundant chimneys. Roof made good with matched tiles or slate.
Capping unused flues to weatherproof while preserving ventilation.
New pots, anti-downdraft cowls, bird guards and ventilation cowls fitted properly.
Repointing — sometimes just called chimney pointing — is the single most common chimney repair we carry out in Leeds. Decades of Yorkshire freeze-thaw cycles crack and wash out mortar joints, and once water gets behind the face of the stack, damage accelerates fast. Repointing done properly means raking the failed joints out to a sound depth, then repointing in a mortar that suits the building: lime or NHL mortar for Victorian and Edwardian brick and stone stacks (so the masonry can breathe), and a suitable sand-cement mix on modern chimneys. A hard cement mortar slapped over a soft-brick Victorian stack is one of the most common bodges we're asked to put right — it traps moisture and spalls the brick faces off.
Most Leeds stacks can be fully repointed in one to two days once the scaffold is up, and a properly repointed chimney should then be good for decades.
The junction where the chimney meets the roof is the most common source of "chimney leaks" — often the stack itself is fine and it's the lead flashing that has failed. Tell-tale signs are damp on the chimney breast after rain, staining on ceilings near the stack, and visibly lifted or cracked lead. We repair and renew chimney flashings in proper code-4 UK-rolled lead: stepped flashings chased into the mortar joints on the sides, a front apron, and a back gutter behind the stack — the piece that fails most often and the one cheap repairs usually skip. Where an old repair has been smeared in flashing tape or mortar fillets, we strip it back and do it right.
A flashing renewal is a fraction of the cost of a rebuild, so it's always worth diagnosing properly first — we'll tell you honestly which one you need.
We cover chimney repairs across Leeds. Local pages for the areas we’re asked about most: Meanwood, Roundhay, Bramley, Horsforth, Pudsey, Alwoodley, Kirkstall, Guiseley, Headingley, Morley, Cross Gates, Hunslet. See every area on our coverage map.
Rotten boards out, UPVC or timber in, and roof ventilation left clear instead of sealed up.
Learn More →New runs, repairs, realignment and clearing, so the water goes down the pipe and not down the wall.
Learn More →Storm damage and sudden leaks made safe with temporary covers, then put right properly afterwards.
Learn More →Industrial units, shops and managed property portfolios. RAMS supplied, work scheduled round the operation.
Learn More →Slipped and cracked tiles, failed flashing and leaks traced back to where they start rather than where they show.
Learn More →Strip, re-batten, breathable membrane and a covering chosen to suit the house. Scaffolded properly, left clean.
Learn More →Welsh slate, Yorkshire stone, clay and concrete tile — matched to what is already up there and coursed to suit.
Learn More →EPDM, GRP and torch-on felt on extensions, garages, dormers and bay tops, laid to a fall that sheds water.
Learn More →Free drone survey, written quotation, fully insured. Building regs included.